TM 10-4610-310-14
0090 00
REMOVAL - continued
Remove tank inlet piping. See WP 0085 00.
1.
Remove flow controller (2) from the solenoid valve (1) and adapter (3). See Figure 2.
2.
Figure 2. Flow Controller (5 GPM).
Flow Controller (8 GPM)
The flow controller (8 GPM) is located in the backwash inlet piping. See
Figure 3.
BACKWASH INLET PIPING
SOME DETAILS
REMOVED FOR
CLARITY
FLOW CONTROL VALVE
Figure 3. Backwash Inlet Piping.
