TM 10-4610-310-14
0096 00
Removal continued
Remove and retain wire tags.
4.
Remove the conduit (8) from the junction box (9). See Figure 3.
5.
Remove the conduit (8) from the high-pressure switch (6) at the top nut (5). Pull wires out from the conduit
6.
(8).
SOME DETAILS
OMITTED FOR
CLARITY
Figure 3. High-Pressure Switch Removal.
Remove tubing from elbow fitting (4).
7.
Remove screws (7), nuts (1) and washers (2).
8.
Remove elbow fitting (4) and adapter (3).
9.
Low-Pressure Switch
Confirm that the correct switch is selected. See the note at the beginning of this work package.
1.
Loosen four screws on junction box cover. Remove junction box cover.
2.
Remove two wires numbers 2 and 5 from terminal block. See Figure 2.
3.
Remove and retain wire tags.
4.
