TM 10-4610-310-14
0095 00
AIR FILTER ASSEMBLY REMOVAL
2. Disconnect air filter assembly (1). Remove the wing nut (7), cover (8), and filter element (6) from the filter
housing (9). Washer (10) is affixed to cover (8). See Figure 2.
STUD
AIR SHUTOFF VALVE
INTAKE MANIFOLD
Figure 2. Air Cleaner Assembly.
3. Remove two nuts (5), two washers (4), two lock washers (3) and one bolt (11) from the filter housing.
4. Remove filter housing (9) from the shut off valve.
Remove the gasket (2 a). Replace if damaged.
5.
Slide the air shutoff valve from the studs.
6.
Remove the gasket (2 b). Replace if damaged.
7.
AIR TANK SOLENOID COIL REMOVAL
Remove vent assembly (5) from solenoid valve (1). See Figure 3.
1.
Figure 3. Air Tank Solenoid Coil Removal
2. Remove nut (4) spring washer (3) and slide off the coil (2) from the solenoid valve (1). See Figure 3.
3. Unthread the electrical conduit from solenoid coil (2).
