TM 10-4610-310-14
DIRECT SUPPORT/GENERAL SUPPORT MAINTENANCE
LIGHTWEIGHT WATER PURIFIER
DIESEL ENGINE
CRANKCASE COVER
CHECKS AND SERVICES
INITIAL SETUP
Tools
Equipment Condition Required
Shop equipment, automotive, common 1 and 2
Engine Oil Drained (WP 0094 00)
Engine separated from gearbox (WP 0094 00)
Engine removed from module (WP 0094 00)
Materials/Parts
General Safety Instructions
Observe all CAUTIONS
Solvent, dry-cleaning, (MIL-PRF-680)
Rags, wiping, cotton, (item 21, WP 0136 00))
Seal, oil, crankshaft, (PN 160210-02220)
GENERAL
This work package contains the instructions for checks and services of the Model L48EE diesel engine
crankcase cover used on the high-pressure pump module in the Lightweight Water Purifier (LWP).
CRANKCASE COVER
NOTE
Always handle the crank case cover with care. When the crankcase cover is disassembled, replace it if damaged
or deformed.
Removal
1. Lay engine down on the flywheel side for ease of operation and minimal oil leak.
2. Disassemble the crankcase cover (4) from the engine by removing fourteen screws (2) and stiffener bolt
(11). See Figure 1.
Figure 1. Crankcase Cover.
