TM 10-4610-310-14
0124 00
FUEL PUMP - continued
PUMP BODY
PUMP MOUNTING FLANGE
CONTROL LEVER
INJECTION TIMING
ADJUSTING SHIM(S)
TAPPET FOR FUEL PUMP
Figure 2. Fuel Pump Configuration.
Disassembly
1. The fuel pump has a standard pump body.
2. Disassemble and reassemble the fuel pump in the directional order of UP (⇑), DOWN (⇓), and SIDE
(⇐) from the center of the fuel pump (marked C). See Figure 3.
3. Disassemble the fuel pump from the top (UP) as follows:
Delivery valve holder
Delivery spring
Delivery valve
Gaskets A and B
4. Assemble gasket A and B for the delivery valve seat in the position at disassembly.
5. Disassemble the fuel pump from the bottom (DOWN) as follows:
Spring pin
Spring seat B
Plunger spring
Plunger
Spring seat A
Snap ring
Control lever with pin
Mounting flange
Gasket
Access hole cover
