TM 5-3800-205-10-2
EXTERNAL AIR TRANSPORT BY CH-47 HELICOPTER - CONTINUED
0016 00
MACHINE DISASSEMBLY AND SECTIONALIZATION - CONTINUED
VERTICAL STUDS
TWO STRAPS
MIDDLE GUARD
PLATE
REAR
GUARD
PLATE
390-1737
FRONT GUARD PLATE
THREE CUSHION PADS
Table 3. Stowage Instructions for ISU-60 Container - Single-Door End.
COMPONENT
STOWAGE INSTRUCTIONS
1.
Place exhaust stack in left cutout of cushion pad, on left side of shelf. Lower end
Exhaust Stack and
of stack should be facing out.
Windshield Wiper Arm
2.
Place windshield wiper arm assembly next to exhaust stack.
Assembly
3.
Secure components with three straps.
Engine Grille
1.
Place engine grille in middle of shelf.
2.
Secure engine grille with two straps.
Guard Plates
1.
Position two straps lengthwise on top of bottom cushion pad.
2.
Place rear guard plate on pad, with slotted holes in plate notched into vertical studs
at back of shelf.
3.
Position second cushion pad.
4.
Place front guard plate on second pad, in same manner as rear guard plate.
5.
Position third cushion pad.
6.
Place middle guard plate on third pad.
7.
Secure guard plates with two straps.
Upper Handrail (with
1.
Place against right-side wall of container.
Side Mirror)
2.
Secure with one strap.
0016 00-37
