TM 5-3800-205-10-2
EXTERNAL AIR TRANSPORT BY CH-47 HELICOPTER - CONTINUED
0016 00
MACHINE ASSEMBLY - CONTINUED
g.
pry bar and torque wrench;
h.
front stability skid;
i.
two front stability skid braces;
j.
rear stability skid; and
k.
two cutting edge wheels.
TORQUE WRENCH
CENTER POST
FRONT
AND PRY BAR
RETAINER
STABILITY SKID
390-1118
CONTAINER
FRONT
REAR
CUTTING
STABILITY CENTER POST
STABILITY
EDGE WHEELS
SKID
SKID
BRACES
Table 8. Stowage Instructions for ISU-60 Container - Two-Door End.
COMPONENT
STOWAGE INSTRUCTIONS
Pry Bar and Torque
1.
Place each component in cushion pad on shelf, against back wall of container.
Wrench
2.
Secure components with three straps.
Front Stability Skid
1.
Place front stability skid in left rear corner on floor, with "foot" of skid facing back
wall. Leg of skid rests in U-shaped channel of support post.
2.
Secure leg of skid to support post with one strap.
Front Stability Skid
1.
Place braces in cushion pad on left side of floor.
Braces
2.
Secure with two straps.
0016 00-68
