TM 5-3800-205-10-2
AIR TRANSPORT BY C-130 AIRCRAFT - CONTINUED
0017 00
CONFIGURE MACHINE FOR AIR TRANSPORT
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
1.
Place ISU-60 container near staging area off tarmac where machine will be configured for air transport. Remove the fol-
lowing items from container:
a.
toolbox;
b.
exhaust extension;
c.
four steering cylinder locking collar assemblies, two short (6 5/8 in.) and two long (10 3/4 in.);
STEERING CYLINDER LOCKING
COLLAR ASSEMBLIES
EXTENSION
390-1119
TOOLBOX
d.
two turnbuckles;
NOTE
Before the remaining components can be removed, remove post retainer and remove container center post.
e.
load transfer relief valve and hose assembly;
f.
pry bar;
g.
two cutting edge wheels; and
0017 00-3
