TM 5-3800-205-10-2
EXTERNAL AIR TRANSPORT BY CH-47 HELICOPTER - CONTINUED
0016 00
MACHINE ASSEMBLY - CONTINUED
TORQUE WRENCH
CENTER POST
FRONT
AND PRY BAR
RETAINER
STABILITY SKID
390-1118
CONTAINER
FRONT
REAR
CUTTING
STABILITY CENTER POST EDGE WHEELS
STABILITY
SKID
SKID
BRACES
Table 8. Stowage Instructions for ISU-60 Container - Two-Door End - Continued.
COMPONENT
STOWAGE INSTRUCTIONS
Rear Stability Skid
1.
Place in front of front stability skid, with "foot" facing out.
2.
Orient rear stability skid so that mounting leg with cutout is aligned with base of
mounting post.
3.
Secure leg to base of mounting post with two pins.
4.
Secure legs of front and rear stability skids together with one strap.
Cutting Edge Wheels
1.
Place two straps through loops on floor, on right side of container.
2.
Place one cutting edge wheel on its side with wheel facing left.
3.
Place other cutting edge wheel in front of first, with wheel facing right.
4.
Place H-shaped bracket on top and pass two straps through bracket.
5.
Tighten straps.
Container Center Post
1.
Position center post, installing bottom end first.
2.
Raise shelf slightly to lock center post in position.
3.
Install center post retainer and tighten.
CAUTION
Check to ensure all components are securely fastened prior to closing
and securing door. Failure to do so may result in damage to equip-
ment.
0016 00-69
