TM 5-3800-205-10-2
RAIL TRANSPORT - CONTINUED
0020 00
SUMMARY OF PROCEDURES--RAIL TRANSPORT (OCONUS)
NOTE
The following summary of procedures is provided to assist personnel preparing the machine for OCONUS
rail transport.
1.
Configure machine for rail transport:
a.
Remove windshield wiper arm and windshield.
b.
Remove ROPS/FOPS.
c.
Remove water pump motor hydraulic hoses and stow on top of tank.
d.
Remove exhaust stack and install exhaust extension.
e.
Remove upper handrail with side mirror.
f.
Remove handrails from rear of water distributor.
2.
Load machine onto flatcar.
3.
Secure machine on flatcar:
a.
Install all steering locks.
b.
Provide blocking, shoring, wind protection safeguards, and vandalism protection. Tie down machine.
c.
Pack ISU-60 container and load on flatcar. Tie down container.
4.
The following illustration shows the water distributor configured for OCONUS rail transport.
.
OCONUS RAIL
0020 00-3
