TM 5-3800-205-23-3
FUEL LEVEL SENDING UNIT AND DIAL SENSOR REPLACEMENT - CONTINUED
0007 00
FUEL LEVEL SENDING UNIT REMOVAL
1.
Remove dial sensor (Refer to Dial Sensor Removal).
NOTE
Ensure area around fuel level sending unit is clear of dirt and debris.
2.
Remove six screws (6), lockwashers (7), flatwashers (8), and fuel level sending unit (4) from fuel tank (9). Discard lock-
washers.
3.
Remove and discard preformed packing (10) and gasket (11) from fuel level sending unit (4).
10
4
4
390-1292
11
9
6,7,8
FUEL LEVEL SENDING UNIT INSTALLATION
1.
Install new preformed packing (10) and new gasket (11) on fuel level sending unit (4).
NOTE
Ensure area around fuel level sending unit is clear of dirt and debris.
2.
Install fuel level sending unit (4) on fuel tank (9) with six flatwashers (8), new lockwashers (7), and screws (6).
3.
Install dial sensor (Refer to Dial Sensor Installation).
END OF WORK PACKAGE
0007 00-3
