TM 5-3800-205-23-3
REAR HUB AND DISC REPLACEMENT - CONTINUED
0010 00
INSTALLATION - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
3
Hub weighs 250 lb (113 kg).
2.
Attach lifting bracket, two nylon lifting straps, and
lifting device to hub (3). Position hub on axle shaft
(6).
390-557
6
3.
Install plate (9) on hub (3) with six bolts (10).
3
390-556
10
9
0010 00-4
