TM 5-3800-205-23-3
AIR/HYDRAULIC BRAKE CYLINDER REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
References:
Maintenance Level
Unit
TM 5-3800-205-23-1
Tools and Special Tools
Tool kit, general mechanic's (Item 33, WP 0045 00)
Shop equipment, common no. 1 (Item 24, WP 0045
Equipment Condition
Rear steps removed (WP 0018 00)
Materials/Parts
Air hose disconnected from quick-release valve
Cap set, protective (Item 5, WP 0044 00)
Tag, marker (Item 39, WP 0044 00)
Backup alarm removed (WP 0008 00)
Tape, antiseizing (Item 40, WP 0044 00)
WARNING
Do NOT disconnect any airlines or fittings unless engine is shut down and air system pressure is
relieved. Failure to follow this warning could result in serious injury to personnel.
Always wear eye protection when disconnecting air lines. Residual air will be expelled. Failure to fol-
low this warning may result in serious eye injury.
NOTE
Tag all hoses, wires, and tubes to aid in installation. Plug all lines, hoses, and tubes to prevent fluid loss
and contamination of brake fluid.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance,
testing, adjusting and repair of the machine. Be prepared to collect fluid with suitable containers before
opening any compartment or disassembling any component containing fluids.
Dispose of all fluids according to local regulations and mandates.
