TM 5-3800-205-23-3
REAR HUB AND DISC REPLACEMENT - CONTINUED
0010 00
INSTALLATION - CONTINUED
4.
Clean and inspect outer roller bearing cone (9), pack
7,8
3
9
with grease, and install on axle shaft (6).
5.
Install locknut (8) on axle shaft (6). Tighten locknut
until hub seizes, loosen locknut, and tighten to 376 lb-
ft (510 Nm).
6.
Install tab lockwasher (7) on axle shaft (6).
390-554
6
7.
Install locknut (5) on axle shaft (6).
5
390-553
6
8.
Install new gasket (4) on cover (2).
4
2
390-552
0010 00-5
