TM 5-3800-205-23-3
AIR/HYDRAULIC BRAKE CYLINDER REPLACEMENT - CONTINUED
0011 00
REMOVAL
CAUTION
Always use two wrenches on fittings when removing brake lines. Failure to do so may damage fittings.
1.
Loosen nut (2), disconnect tube (1) from air/hydraulic brake cylinder (8), and allow brake fluid to drain into a suitable
container.
2.
Remove two screws (3), washers (4), and electrical leads (5) from air/hydraulic brake cylinder (8).
3.
Loosen nut (7), disconnect tube (6) from air/hydraulic brake cylinder (8), and allow brake fluid to drain into a suitable
container.
4.
Disconnect tube (6) at other end from brake fluid reservoir and remove, as required.
2
1
3,4 (HIDDEN)
5
6
7
390-1583
8
5.
Disconnect air exhaust tube (9) from air/hydraulic brake cylinder (8).
6.
Remove two nuts (10), lockwashers (11), four flatwashers (12), two bolts (13), air/hydraulic brake cylinder (8), and
7.
Remove quick-release valve from air/hydraulic brake cylinder (8) (WP 0014 00).
0011 00-2