TM 5-3800-205-23-3
HYDRAULIC HOSES REPLACEMENT (WATER TANK-TO-HYDRAULIC MOTOR) - CONTINUED
0025 00
REMOVAL
1.
Disconnect hydraulic hose (2) from water pump hydraulic motor (1) at elbow fitting (3). Plug end of hose with a rag.
2.
Remove four bolts (4), elbow fitting (3), and O-ring (5) from hydraulic motor (1). Plug opening in hydraulic motor and
discard O-ring.
1
2
3
5
4
(HIDDEN)
3.
Disconnect hydraulic hose (2) from water tank bulkhead connector (6) and plug hydraulic hose.
4.
Remove four bolts (8), bulkhead connector (6), and O-ring (7) from water tank bulkhead. Discard O-ring and plug open-
ing in bulkhead.
6,7
8
2
(HIDDEN)
0025 00-2
