TM 5-3800-205-23-3
HYDRAULIC HOSES REPLACEMENT (WATER TANK-TO-HYDRAULIC MOTOR) - CONTINUED
0025 00
INSTALLATION
NOTE
Lubricate new O-rings with oil prior to installation.
1.
Install new O-ring (7) in bulkhead connector (6).
2.
Install four bolts (8) and bulkhead connector (6) to water tank bulkhead.
3.
Connect hydraulic hose (2) to bulkhead connector (6).
4.
Install new O-ring (5) in elbow fitting (3).
5.
Install four bolts (4) and elbow fitting (3) to water pump hydraulic motor (1).
6.
Connect hydraulic hose (2) to elbow fitting (2).
7.
Connect hydraulic hoses to quick disconnect fittings at top of tank (WP 0024 00).
8.
Fill hydraulic reservoir (Refer to Unit PMCS in TM 5-3800-205-23-1).
9.
Operate hydraulics (TM 5-3800-205-10-2) and check for leaks.
10.
Install rear steps (WP 0018 00).
END OF WORK PACKAGE
0025 00-3
