TM 5-3800-205-23-3
CHECK VALVE AND LIFT CYLINDER REPLACEMENT - CONTINUED
0026 00
CHECK VALVE REMOVAL
1.
Relieve hydraulic pressure by exercising control levers.
2.
Disconnect three quick disconnect hoses at draft arm (TM 5 3800-205-10-2).
3.
Loosen nut (7) and disconnect hose (8) from swivel adapter (6). Install protective cap.
4.
Loosen nut (4) and disconnect hose (5) from elbow fitting (3). Install protective cap.
5.
Loosen nut (9) and disconnect hose (1) from check valve (2). Install protective cap.
1
2
9
8
7
6
3
5
4
6.
Loosen nut (13) and remove swivel adapter (6) and O-ring (14) from check valve housing (10). Discard O-ring.
7.
Loosen nut (11) and remove elbow fitting (3) and O-ring (12) from check valve housing (10). Discard O-ring.
0026 00-2
