TM 5-3800-205-23-3
SUCTION INLET MANUAL VALVE AND VACUUM VALVE REPLACEMENT - CONTINUED
0033 00
SUCTION INLET MANUAL VALVE INSTALLATION
1.
If removed, clean threads and apply a thin coat of sealing compound to threads of flange (6) and install coupling (7) to
flange.
2.
Install suction inlet manual valve (1) and flange (6) with coupling (7) to suction pipe (5) with four bolts (4), new lock-
washers (3), and nuts (2).
3.
Stow foot valve assembly (8) on suction inlet (TM 5-3800-205-10-2).
2,3,4
1
5
6
7
8
VACUUM VALVE REMOVAL
1.
Disconnect tube (13) from adapter (14).
2.
Remove adapter (14) from vacuum valve (15).
3.
Remove two hoses (9 and 11) from tee (10).
4.
Remove tee (10) from adapter (12).
5.
Remove adapter (12) from vacuum valve (15).
6.
Remove vacuum valve (15) from water pump housing elbow (16).
0033 00-2
