TM 5-4610-218-34
Figure 5-11. Slurry Feeder Housing, Disassembly and Reassembly
(3) Install the tubing between the dilution
e. Reassembly.
tank and the erdlator tank as illustrated in fig-
(1) Reassembly of the slurry feeder housing
ure 5-6.
is the reverse of the disassembly process de-
scribed in figure 5-11.
(4) Install the slip clutch as shown in fig-
(2) Reassembly of the slurry feeder shaft
ure 5-5.
and seals is the reverse of the disassembly pro-
cedure described in figure 5-10.
(5) Refer to figure 5-4 and install the chain
tightener and chain, install the chain guard as
(3) Reassemble the slurry feeder agitators
illustrated in figure 5-3.
as illustrated in figure 5-9.
f. Installation.
(6) Install the filtered water piping as illus-
(1) Refer to figure 5-8 and install the slurry
trated in figure 5-2.
feeder agitators.
(7) Install the raw water piping as shown
(2) Refer to figure 5-7 and install the chem-
in figure 5-1.
ical slurry feeder tank.
5-8
