TM 5-4610-223-12
1.
Screw, mach, No. 6-32 x 1
3.
Window assembly
in. (4 reqd)
4.
Frame
2.
Screw, mach, No. 4-32 x
5.
Guard
1/4 in.
Figure 4-21. Stationary Window, Outside View.
(2)
Remove eighteen screws (3, fig. 4-13) and lift frame (4) and glass (5) from door (6) as an assembly.
c.
Replace. Replace all parts that are unserviceable.
d.
Installation.
(1)
Position glass (5, fig. 4-13) in door (6).
(2)
Install screws (3) in frame (4).
(3)
Position guard (5, fig. 4-21) on outside of window assembly (3) and install screws (1).
4-29. NONSTATIONARY WINDOW.
a.
General. A nonstationary window is located in each rear door of the van body. They have the crank on the
inside which is used to open the windows outward. They are also equipped with blackout panels.
b.
Removal.
(1)
Remove guard (1, fig. 4-22) by removing four screws (3).
(2)
Turn hand crank (6, fig. 4-23) counterclockwise and open window.
4-53