TM 5-4610-223-12
Legend for figure 4-24:
1.
Upright arm mtg angle
6.
Pin, round hd, 5/16 x
bracket (3 reqd)
1-1/2 in. (3 reqd)
2.
Screw, mach, 5/16-18 x
7.
Roller (3 reqd)
1-1/2 in. (12 reqd)
8.
Cable (3 reqd)
3.
Washer, flat, 5/16 in.
9.
Cable terminal fork (3 reqd)
(9 reqd)
10.
Cable bar (3 reqd)
4.
Nut, hex, 5/16-18
11.
Screw, mach, 1/4-20 x ¾
(6 reqd)
in. w/nut (6 reqd)
5.
Pin, cotter, 1/8 x 1 in.
12.
Guide (6 reqd)
(3 reqd)
13.
Upright arm (3 reqd)
14.
Roller mtg bracket (3 reqd)
b.
Disassembly of Door Hinge and Seals.
(1)
Remove screws (2, fig. 4-26) and lift hinge (1) from top of door (4). Remove hinge seal (3) from door.
(2)
Drive out rivets (7) from sides and bottom of door by driving center pin out of rivet and removing rivet head
by cutting off with cold chisel. Remove reinforcing bars (5) and door seals (6).
1.
Door hinge
3.
Top door
2.
Screw, hex hd, the forming
4.
Van body
No. 14-14 x 3/4 in.
(50 reqd)
Figure 4-25. Partial View of Top Door Hinge.
4-62
