TM 55-1930-209-14&P-11
c.
Push keyboard key 1 (prompt ADVANCE CURSOR) and move cursor to totalizer to be activated/ deactivated.
d.
Push keyboard key 2 (prompt EDIT THIS ONE). Make sure video monitor displays totalizer information with
totalizer label at top of page and prompts in upper right corner. Make sure cursor is on the line with 'TOTALIZER
ACTIVATE."
e.
Push keyboard key 2 (prompt EDIT THIS ONE) again. Make sure cursor extends all the way to the right.
NOTE
When totalizer Is deactivated, letter X replaces numbers to indicate totalizer is no longer
counting. After totalizer is repaired or replaced, totalizer is reset to agree with flow meter
reading and then is reactivated. Letter X is replaced with input figures.
f.
To activate totalizer, push keyboard key "'0" and to deactivate totalizer, press keyboard key 1.
g.
To set number for totalizer to begin counting from zero or number shown on flowmeter, do the following' (1)
Press keyboard key 1 (ADVANCE CURSOR).
(2)
Press keyboard key 2 (EDIT THIS ONE)
(3)
Press keyboard number keys to set desired number.
(4)
Push ENTER keyboard key to enter numbers. Note that cursor will shorten.
h.
Push EDIT keyboard key to leave edit mode and return EMS video monitor to normal scanning or push keyboard
key 3 (prompt SELECT NEW TOTALIZER) to return to display page.
i.
When display page appears on video monitor, take one of these three actions.
(1)
Push keyboard key 1 (prompt ADVANCE CURSOR) to move cursor to select new totalizer.
(2)
Push keyboard key 3 (prompt SELECT NEW PAGE) to select a new display page.
(3)
Push keyboard key 4 (prompt RETURN TO EDIT MENU) to return to EDIT MENU.
3-6.2.5 Using EDIT MENU option 4 to set time and date on EMS clock
NOTE
EMS maintains a 24 hour clock as well as displaying month, day and year at bottom of each
video monitor display page. When main power is off, a battery inside main processor keeps
clock operating so that next time EMS is turned on, correct time is shown on display pages.
a.
Push keyboard key 4 (option SET TIME/DATE). Make sure video monitor displays the following and prompts are
in upper right corner of screen.
OLD
NEW
MONTH
JAN
DAY
31
YEAR
1986
HOUR
16
MINUTE
52
*After editing, new information appears on screen.
3-19
