Engine
Disassembly and Assembly
Crankshaft Pulley (3304)
2.
Install tooling (A), and loosen the pulley from the
crankshaft.
3.
Remove tooling (A).
4.
Remove the bolt, washer, spacer and crankshaft
pulley from the crankshaft.
Install Crankshaft Pulley (3304)
1205-012
1.
Install crankshaft pulley (1) on the crankshaft. Install
washer (2) with the maximum flat area next to the
crankshaft.
2.
Install bolt (3), and tighten it to a torque of 284 to 340
Nom (210 to 250 Ib.ft.). Hit the bolt with a hammer, and
tighten it again to a torque of 284 to 340 Nm (210 to 250
Ib.ft.).
Crankshaft Vibration Damper
And Pulley (3306)
Remove Crankshaft Vibration Damper
And Pulley (3306) 1205-011
Tools Needed
A
FT915
Adapter
1
S1590
Bolt [3/8"-16 NC x 2 in.(51 mm)
6
long]
5F7342
Adapter
2
5F7369
Leg*
2
3H465
Plate*
4
1B4207
Nut*
2
887560
Step Plate
1
1P820
Hydraulic Puller Group
I
6V9061
Hand Pump (or electric)
1
*Part of 8B7548 Push-Puller
1.
Remove bolt (1) and washer (2) from the crankshaft.
Put enough spacers (4) on the bolt to get approximately
3.18 mm (. 125 in.) of clearance between washer (2)
and vibration damper and pulley assembly (3). Install
bolt (1), washer (2), and spacers (4).
102