TM 10-4610-215-24
TM 08580A-24/2
WARNING
Drycleaning solvent Fed. Spec. P-D-680 is potentially
dangerous. Avoid repeated and prolonged breathing of vapors
and skin contact. Do not use near open flame, arcing equipment
or other ignition sources. Always wear protective clothing and
eyewear.
(3) Clean motor using a stiff brush and drycleaning solvent Fed. Spec. P-D-680.
(4) Allow to air dry.
(5) Move motor to work area.
(6) Remove two screws (1) from conduit box (5) and conduit box cover (2).
(7) Remove conduit box cover (2) from conduit box (5).
(8) Remove two screws (3) and two lockwashers (4) from motor casing (27), gasket (6), and conduit box
(5).
(9) Remove conduit box (5) and gasket (6) from motor casing (27). Discard gasket (6).
(10) Remove shaft key (7) from rotor shaft (15).
(11) Remove four screws (8) from motor casing (27) and fan cover (9).
(12) Remove fan cover (9) from motor casing (27).
(13) Loosen, but do not remove, clamp screw on fan (10) and remove fan (10) from rotor shaft (15).
NOTE
Mark fan-end plate, pump-end plate, and motor casing with
matching punch pricks for ease of reassembly.
(14) Remove four through-bolts (11) from pump-end plate (14), motor casing (27), and fan-end plate (12).
(15) Remove fan-end plate (12) from motor casing (27).
(16) Remove three spacers (13) from fan-end plate (12) on rotor shaft (15).
3-41
