TM 10-4610-229-24
2-69. GAGE PANEL ASSEMBLY REPLACEMENT/REPAIR (CONT)
c. Toggle Switch Replacement
WARNING
To prevent electric shock, make sure that pretreatment assembly power cable is unplugged.
1
Unplug pretreatment assembly power cable.
2
Tag and disconnect two wires from rear of switch.
3
Remove nut from front of switch. Pull switch from rear of panel.
4
Install switch in rear of panel.
5
Install nut on front of switch.
6
Connect wires. Remove tags. Plug in pretreatment assembly power cable.
d. Pressure Differential Switch Replacement
WARNING
To prevent electric shock, make sure that pretreatment assembly power cable is unplugged.
1
Unplug pretreatment assembly power cable
2-167
