TM 10-4610-229-24
2-81. HOUSING AND V-BELTS REPLACEMENT/REPAIR (CONT)
5
Install front V-belt housing (two pieces). Install 32 mounting screws and lockwashers.
2-82. PILLOW BLOCK ASSEMBLY REPLACEMENT/REPAIR (CONT)
This task covers:
a.
Removal
c.
Assembly
b.
Disassembly
d.
Installation
INITIAL SETUP
Use With
Equipment
Condition
High Pressure Pump Assembly
Para
Condition Description
Tools
2-81
V-belt housing removed.
General Mechanic's Automotive
Tool Kit, item 10, appendix B
a.
Removal
1
Loosen two locknuts. Loosen two adjusting bolts.
2
Remove four bolts, washers, two brackets, and pillow block.
b.
Disassembly
1
Remove two grease fittings.
2-214
