TM 10-4610-229-24
2-83. HIGH PRESSURE PUMP ENGINE REPLACEMENT (CONT)
a.
Removal
1
Loosen two hose clamps from lower water pump hose. Remove hose from water pump.
2
Remove wire from fuel level sending unit. Cut wire ties and move wire aside.
3
Using suitable lifting device, support weight of engine.
4
Remove 12 engine support mounting bolts and lockwashers.
5
Raise engine.
6
Remove 16 engine mounting bolts and lockwashers. Remove engine supports.
b.
Installation
1
Install supports on engine. Install 16 engine mounting bolts and lockwashers.
2
Install engine on skid assembly. Install 12 engine support mounting bolts and lockwashers.
2-216
