TM 10-4610-229-24
2-114. SAMPLE VALVE ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a.
Removal
c. Installation
b.
Inspection
INITIAL SETUP
Use With
Tools
Reverse Osmosis Block Assembly
General Mechanic's Automotive Tool
Kit, item 10, appendix B
a. Removal
1
Disconnect discharge tube and move aside.
2
Disconnect product tube.
3
Remove sample valve assembly from pressure tube.
4
Remove sample valve and two reducers from T-pipe.
5
Remove male connector and reducer from T-pipe.
b. Inspection
Inspect parts for damage. Replace as required.
c. Installation
1
Install reducer and male connector in T-pipe.
2
Install two reducers and sample valve in T-pipe.
2-281