TM 10-4610-229-24
2-113. PRODUCT SPOOL ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a.
Removal
c. Assembly
b.
Disassembly
d. Installation
INITIAL SETUP
Use With
Personnel Required
Reverse Osmosis Block Assembly
Two
Tools
Supplies
General Mechanic's Automotive
Tape, item 36, appendix C
Tool Kit, item 10, appendix B
Silicone lubricant, item 22,
Common No. 1 Organizational
appendix C
Maintenance Automotive
Maintenance and Repair Shop
Equipment, item 11, appendix B
a. Removal
NOTE
Two personnel required for next two steps.
1
Have one person support the product spool. Remove screw and nut from hold-down clamp.
2
Remove two nuts, two bolts, coupling halves, and gasket. Remove product spool.
2-278
