TM 10-4610-229-24
3-54. INJECTION PUMP REPAIR (CONT)
22
Check rack travel after each pump is installed. Total rack movement should be 0.800 in.
23
Using bushing wrench, torque bushing to 140-160 ft lb.
24
Remove bushing wrench, install felt seals and protection caps.
25
Install governor (para 3-57).
3-56. GOVERNOR ADJUSTMENT
This task covers adjustment only.
INITIAL SETUP
Use With
References
High Pressure Pump Assembly
TM 10-4610-229-10
Tools
General Mechanic's Automotive
Tool Kit, item 10, appendix B
Basic Field Maintenance
Automotive Maintenance and
Repair Shop Equipment, item 20,
appendix B
CAUTION
Do not adjust governor high idle above 2,090 rpm. Damage to engine can result if setting is too high.
1
Connect tachometer to engine.
3-148
