TM 10-4610-229-24
3-57. GOVERNOR REPLACEMENT/REPAIR (CONT)
b. Disassembly
1
Clean gasket mounting surfaces.
2
Remove seat retaining ring and pin.
3
Remove seat, bolt, two washers, and spring.
4
Remove sleeve and bearing assemblies from cylinder and weight assemblies.
5
Remove ring from sleeve.
6
Remove bearing and washer from sleeve.
7
Remove retaining ring.
8
Remove weight assembly from cylinder.
9
Remove piston and sleeve from cylinder.
10
Remove O-ring seal from sleeve.
3-152
