TM 10-4610-229-24
3-57. GOVERNOR REPLACEMNTI/REPAIR (CONT)
4
Install governor housing on pump. Install housing mounting screws.
5 Install spring and shaft stop collar. Install retaining screw.
6
Install idle screws.
7
Install fuel shutoff lever, lock, and bolts.
8
Install gasket, rear stop/run housing cover, and stop/run housing. Install two bolts and washers.
9
Install governor housing rear cover and gasket. Install five bolts.
10
Install governor shaft cover. Install two bolts.
11
Install idle screw housing cover and gasket. Install bolts.
12
Install and fasten governor seal.
13
Install spring and front stop/run cover and gasket. Install four bolts and washers.
14
Install fuel injection pump (para 3-54).
15 Adjust rack (para 3-54) and governor (para 3-56).
3-58. FUEL PUMP REPAIR
This task covers:
a.
Disassembly
b. Assembly
INITIAL SETUP
Use With
Supplies
High Pressure Pump Assembly
Sealant, item 7, appendix C
Fuel, item 11, appendix C
Tools
Equipment
General Mechanic's Automotive
Condition
Tool Kit, item 10, appendix B
Common No. Organizational
Para
Condition Description
Maintenance Automotive
Maintenance and Repair Shop
2-97
Fuel pump removed.
Equipment, item 11, appendix B
3-155