TM 10-4610-229-24
2-15. BATTERY CABLE REPLACEMENT/REPAIR (CONT)
2
Loosen NEG (-) battery terminal nuts. Disconnect battery cables.
3
Loosen POS (+) battery terminal nuts. Disconnect battery cables.
4
Remove nut and lockwasher from starter. Remove cable.
5
Remove bolt and lockwasher from engine. Remove cable.
High Pressure Pump Assembly
WARNING
· To prevent injury to personnel from electric shock, be very careful when disconnecting battery
cables.
· Fumes from battery acid may cause explosion. To prevent explosion, keep sparks and open
flame away from battery.
1
Remove two battery cover mounting nuts, lockwashers, and flatwashers. Remove battery cover.
2
Remove two battery terminal nuts. Remove two wires leading to plug socket.
3
Reinstall two battery terminal nuts. Do not tighten.
2-38