TM 10-4610-239-24
TM 08580B-24/3
NOTE
There are four R.O. pressure tubes. All are removed and installed the same. One is
shown.
REMOVAL.
a. Remove four nuts (1), lockwashers (2), and screws (3).
b. Remove two clamps (4) from each end of R.O. pressure tube (5).
WARNING
The R.O. pressure tube is heavy. Two people are needed to lift it to prevent personal
injury or damage to the equipment.
c.
Remove R.O. pressure tube (5) from base of pressure tube (6).
INSTALLATION.
a. Position R.O. pressure tube (5) on base of pressure tube (6).
b. Install piping and fittings. For Model No. 0996109001 (Army), refer to paragraph 2-77.
For Model No.
0996108001 (Marine Corps), refer to paragraph 2-78.
c.
Position two clamps (4), one at each end of R.O. pressure tube (5), and install four screws, lockwashers (2), and
nuts (1).
2-214
