TM 10-4610-239-24
TM 08580B-24/3
3-38.
REPLACE WIRING HARNESS AND WIRE LEADS.
This task covers:
a. Removal.
b. Inspection.
c.
Installation.
INITIAL SETUP.
a. Tools. Tool Kit (Appx B, Sect III, Item 10).
b. Equipment Condition:
Control Box and Junction Box assembly:
Power shut down (power source manual).
ROWPU shut down (TM 10-4610-239-10).
Control box assembly removed (paragraph 3-32).
Receptacle connector removed (paragraph 3-37).
NOTE
Procedures are typical and can be used for all wiring harnesses in the
ROWPU. Wiring harness in control box assembly is shown.
3-176
