TM 10-4610-239-24
TM 08580B-24/3
DISASSEMBLY. (Cont)
NOTE
For wires attached to a front panel multipin connector, complete step c.
For wires attached to an internal multipin connector, go to step d.
NOTE
Tag all wires before removal.
c.
d. Using pin removal tool (3) push terminals (4) with bad wires out of connector.
e. Using soldering gun, unsolder wires (5) from terminals (4).
ASSEMBLY.
a. Cut a new length of wire same size as faulty wire.
b. Solder new terminal of same type as used on old wire to new wire.
NOTE
For wires attached to a front panel multipin connector, complete step c.
For wires attached to an internal multipin connector, go to step d.
c.
Using soldering gun, solder wires (1) to terminals (2) as tagged.
d. Using soldering gun, solder wires (5) into terminals(4).
e. Using pin insertion tool (6), insert terminals (4) into connector as tagged.
3-179
