TM 10-4610-239-24
TM 08580B-24/3
3-40.
REPLACE ELECTRICAL RELAYS K10 AND KII.
This task covers:
a. Removal.
b.
Installation.
INITIAL SETUP.
a. Tools. Tool Kit (Appx B, Sect III, Item 10).
Soldering Gun Kit (Appx B, Sect m, Items 6 and 9).
b. Equipment Condition. Control box assembly removed (paragraph 3-32).
REMOVAL.
a. Remove 14 screws (1), lockwashers (2), and flat washers (3). Lower control box cover (4).
NOTE
Tag all wires before removal.
c.
Remove eight nuts (6), lockwashers (7), and flat washers (8) from bracket ('3) and remove relays K11
(10) and K10 (11). Discard lockwashers.
d. Close control box cover (4) and install but do not tighten 14 screws (1), lockwashers (2), and lf t
a
washers (3).
3-180
