TM 10-4610-239-24
TM 08580B-24/3
3-39.
REPAIR WIRING HARNESS AND WIRE LEADS.
This task covers:
a. Disassembly.
b. Assembly.
INITIAL SETUP.
a. Tools. Tool Kit (Appx B, Sect III, Item 10).
Soldering Gun Kit (Appx B, Sect III, Items 6 and 3).
Pin Insertion Tool (Appx B, Sect III, Items 6 and 3).
Pin Removal Tool (Appx B, Sect III, Items 6 and 3).
b. Equipment Condition. Wiring harness removed (paragraph 3-38).
NOTE
Procedures are typical and can be used for all wiring harnesses and wire leads
in the ROWPU.
Refer to wiring diagram in foldout section for wiring harnessbeing repaired.
DISASSEMBLY.
a. Lay out wiring harness on a flat surface.
b. Remove damaged or faulty wire.
3-178
