ARMY TM 10-4610-309-14
MARINE CORPS TM10802A-14/1
0007 00
TACTICAL WATER PURIFICATION SYSTEM (TWPS)
PREPARATION FOR USE AND INSTALLATION INSTRUCTIONS
SET-UP OPERATION UNDER USUAL CONDITIONS
2. SWITCH MAIN
BREAKER OFF
1. CONNECT TO
JUNCTION BOX
3. CONNECT
TO PDP
DUST CAP
DUST CAPS
Figure 9. Pump Skid Power Cable Connections.
2. After making sure that all connections have been completed, switch the Main Breaker on the PDP
back to the ON position.
ESTABLISHING RAW WATER FLOW
It will take 10 minutes or more to prime the raw water pump and another 10 minutes to fill the MF feed
tank 3/4 full as needed to start the TWPS. Plan to establish raw water flow at least 20 minutes before you
expect to begin operation of the TWPS.
The instructions for establishing raw water flow are described in WP 0014, Initial Start-Up or Start-Up with
the System Fully Drained.
0007 00-15