ARMY TM 10-4610-309-14
MARINE CORPS TM 10802A-14/1
0029 00
TACTICAL WATER PURIFICATION SYSTEM (TWPS)
OPERATOR INSTRUCTIONS
PREPARATION FOR MOVEMENT MARINE CORPS UNIT
21. Get the two 10-ft. ratchet straps with the plastic tubes.
22. Hook the long section of the two 10-ft. ratchet straps to the round center frame member of the
diesel pump skid and temporarily lay the straps on the pump power cables (see Figure 11).
23. Place BII Box #4 on top of the diesel pump skid and place the pump power cables on top of the
box (see Figure 11).
24. Place the remaining three BII boxes and the diesel pump fuel tank assembly on top of the motor-
driven pump skids (see Figure 11).
25. Route one of the 10-ft. ratchet straps (one end attached to the diesel-pump skid earlier) over the
boxes and through the fuel tank assembly frame. Attach the free end of the strap to the motor-
driven pump skid.
NOTE
The plastic tube that is provided with two of the 10-ft. ratchet straps is needed to
prevent the ratchet hardware from rubbing a hole in the General Purpose Cover or
Winter Cover that is installed over the MC-TWPS unit.
26. Slide the plastic tube over the ratchet hardware.
DIESEL PUMP
FUEL TANK
ASSEMBLY
PUMP
POWER CABLES
BII BOX
BII BOX #4
RATCHET STRAP
ROUND CENTER
PLASTIC TUBE
FRAME MEMBER
BII BOX
BII BOX
Figure 11. Operator Station Packout 5 and 6.
0029 00-23
