TM 10-4610-310-14
0043 00
PRODUCT FLUSH
Perform product flush. See WP 0013 00.
HIGH pH CLEANING PROCEDURE
1. Make sure cleaning tank drain valve is closed on the chemical module. See Figure 1.
CLEANING
TANK
DRAIN VALVE
MODULE
SHOWN ON
SIDE FOR
CLARITY
Figure 1. Cleaning Tank Drain Valve.
2. Open cleaning tank cover. Support lid as needed. See Figure 2.
3. Place the sampling valve into the cleaning tank and rotate 3-way valve to redirect the water through the
sampling hose.
4. Fill the cleaning tank up to the bottom of the cleaning tank inlet.
CLEANING
CLEANING
TANK INLET
TANK
COVER
3-WAY
VALVE
SAMPLING
HOSE
Figure 2. Filling Cleaning Tank.
