TM 10-4610-310-14
OPERATOR MAINTENANCE
LIGHTWEIGHT WATER PURIFIER
CONTROL MODULE
CHECKS AND SERVICES
INITIAL SETUP
Equipment condition
Diesel engine shut off
All switches on the control panel turned off
GENERAL
This work package contains information and instructions to check the various switches and circuit breakers for
malfunction in the control module used in the Lightweight Water Purifier (LWP).
PILOT LIGHT
1. Switch the circuit breaker (CB1) on.
2. Test the pilot light by pressing on the lens. The light should come on if the bulb is serviceable. See
Figure 1.
3. Replace the bulb if unserviceable. See WP 0102 00. Test the pilot light again.
4. Replace the light assembly if unserviceable. See WP 0102 00.
LATCHES
CIRCUIT
BREAKER
(CB 1)
PILOT LIGHT
(7 PLACES)
CONTROL
PANEL
Figure 1. Control Module.
