TM 10-4610-310-14
UNIT MAINTENANCE
LIGHTWEIGHT WATER PURIFIER
SERVICE UPON RECEIPT
GENERAL
This work package contains information and instructions to perform service tasks after receipt of the Lightweight
Water Purifier (LWP) components.
REPAIR PARTS, SPECIAL TOOLS, TEST MEASUREMENT AND DIAGNOSTIC EQUIPMENT, AND
SUPPORT EQUIPMENT
Common Tools and Equipment
For common tools and equipment, see the Modified Table of Organizational and Equipment (MTOE) applicable
to your unit.
Special Tools, Test Measurement and Diagnostic Equipment, and Support Equipment
Special tools and Test Measurement and Diagnostic Equipment (TMDE) required for operation or maintenance
of the LWP are listed in TM 10-4610-310-24P.
Support equipment is listed in the Components of the End Item (COEI) and Basic Issue Items (BII). See WP
Repair Parts
Repair parts are listed and illustrated in TM 10-4610-310-24P.
SERVICE UPON RECEIPT
Site Selection
Choose a site that is free from sharp objects (rocks, sticks, glass, etc.) that could cut or puncture the collapsible
fabric water tank and interfere with the operation of the LWP. The water tank may be installed on a slope of up to
10 percent (1 foot rise in 10 foot run), but the water tank base should not rest over abrupt drop offs of greater
than 4 inches. See WP 0008 00.
Unloading
Equipment will be unloaded from a High Mobility Multipurpose Wheeled Vehicle (HMMWV) or Triple Shipping
and Storage Container (TRICON) at the operational site. See WP 0006 00 and WP 0007 00. See Figure 1 and
Figure 2.
Figure 1. High Mobility Multipurpose Wheeled Vehicle (HMMWV).
