TM 10-4610-310-14
0084 00
SERVICE UPON RECEIPT - continued
Preliminary Servicing and Adjustment of Equipment
Remove RO simulators. See WP 0045 00.
Draw the chemicals necessary for the mission and store them on the system. See WP 0010 00.
The system must be flushed to remove any preservative that is in the system.
Check the engine and the high-pressure pump for proper lubrication levels.
PREVENTIVE MAINTENANCE CHECKS AND SERVICES
See WP 0037 00 for Preventive Maintenance Checks and Services (PMCS).
TROUBLESHOOTING
Troubleshooting Procedures
See Chapter 3 for operator troubleshooting procedures, Chapter 5 for unit troubleshooting procedures, and
Chapter 7 for direct support/general support troubleshooting procedures for the LWP modules and components.
MAINTENANCE PROCEDURES
General Instructions
Maintenance instructions in this chapter will list resources required, personnel required, and equipment condition
for start of the procedure, except for the following:
Personnel required are listed only if the task requires more than one.
Equipment condition is not listed unless some other condition is required.
Reference to maintenance work packages will pertain only to this technical manual.
Reference to repair parts work packages will pertain only to TM 10-4610-310-24P.
END OF WORK PACKAGE
0084 00-3 / 4 blank
