TM 10-4610-310-14
0085 00
REMOVAL
UF FEED PIPING
1. Loosen the three unions (1). Remove the lock nuts (7) and washers (6) from U-bolt (4). See Figure 2.
Figure 2. UF Feed Piping.
2. Remove the differential pressure gauge tubing from the tee fitting (2).
3. Remove the temperature gauge (3), unthread female camlock (8) and dust plug (9) if necessary.
4. Remove support washer (11) and 30-mesh screen (10) if necessary. Discard screen 30-mesh screen
(10).
5. Remove the feed pressure gauge tubing from tee fitting (5).
UF TANK INLET PIPING
1. Remove nuts (8) and washers (9) from U-bolts (7). Remove U-bolts.
Figure 3. UF Tank Inlet Piping.
