TM 10-4610-310-14
0085 00
UF REJECT PIPING - continued
1. Remove nuts (2), washers (3) from U-bolts (1). Remove U-bolts. See Figure 8.
Figure 8. UF Reject Piping Assembly.
2.
Remove screws (4), lock washers (5), and washers (6) from valve supports.
3.
Remove the coil from the solenoid valve. See WP 0088 00.
4.
Remove the unions as needed to remove the spool pieces. See Figure 7.
5.
Remove check valve (7) if needed.
UF REJECT OUTLET PIPING
1. Loosen the unions (2 and 7). Remove nuts (4), washers (3) and remove U-bolt (1). See Figure 9.
Figure 9. UF Reject Outlet Piping.
