TM 10-4610-310-14
0092 00
REMOVAL continue
Pulsation Dampener
Remove pulsation dampener (1) by unthreading from tee fitting (2). See Figure 2.
SOME
DETAILS
REMOVED
FOR CLARITY
Figure 2. Pulsation Dampener.
INSTALLATION
Apply anti-seize tape on all the threads.
Flow Meter
1. Refer to Figure 1 for this procedure section.
2. Thread the flow meter (4) onto the adapter (5). Ensure that the flow scale faces out to read.
3. Install the elbow fitting (3) onto the flow meter.
4. Install the hose (1) on the elbow fitting and tighten hose clamp (2).
Pulsation Dampener
1. Refer to Figure 2 for this procedure section.
2. Thread pulsation dampener (1) securely onto the tee fitting (2).
END OF WORK PACKAGE
