TM 10-4610-310-14
0093 00
FUEL FILTER - continued
2. Install the plug (2), and washer seal (1) once the fuel tank is drained to avoid contaminants from getting
inside the tank.
3. Remove fuel hose (3) from the fuel cock (6) by loosening the clamp (4).
4. Remove lock nut (5), remove fuel cock (6), and seal (7).
5. Remove screws (8), plate (9), and gasket (10).
6. Remove fuel filter (11), o-ring (12), from fuel tank (13).
AIR SHUTOFF VALVE VENT PLUG
1. Remove vent plug (1) from adapter (2) on the 3-way solenoid valve (3). See Figure 1.
Figure 4. Air Shutoff Valve Vent Plug.
2. Clean the vent plug (2) with soapy water. Ensure air can flow through the plug.
AIR SHUTOFF VALVE
CAUTION
Do not use penetrating oil to lubricate. Do not use too much lubrication. Damage to equipment may result.
1. Lubricate with a few drops of clean engine oil at pivot points (1).
Figure 5. Air Shutoff Valve Lubrication.
