TM 10-4610-310-14
0094 00
LUBRICATION continued
WARNING
All oil spills must be thoroughly wiped up.
Oil spills present a fire and safety hazard to
personnel.
Retrieve hose from Basic Issue Items (BII) box. Install oil drain hose on drain valve. See Figure 2.
2.
DIPSTICK/ OIL FILL
PORT
DRAIN VALVE
OIL DRAIN VALVE
Figure 2. Draining Oil From Diesel Engine.
Loosen dipstick to aid draining. Lift handle on oil drain valve. Drain oil from engine crankcase into a suitable
3.
container.
Push down on drain valve to close. Remove oil drain hose. Tighten dipstick.
4.
NOTE
If only oil change is being performed, add lubricating oil 10W30 to diesel engine through dipstick port. Do not
over fill. The oil level should be in the hatched area of the dipstick. Make sure oil fill plug is in place. The
maximum oil capacity is .85 qt (.8 L).